B6250/B6500 User’s Guide> 31
T
ROUBLESHOOTING
W
HEN
P
APER
J
AMS
Following the message on the control panel, open the cover and
remove the jammed paper. If paper is torn, check for any remaining
torn pieces of paper.
I
NSIDE
C
OVER
A
When the optional offset catch tray is installed, fold the tray first
before opening cover A.
Open Cover A when a message to remove the drum/toner cartridge
is displayed.
1.
Open cover A (1), and
holding the drum/toner
cartridge by the grip,
remove it from the
printer (1).
2.
Turn the roll as shown
and remove any jammed
paper inside (2).
3.
Return the drum/toner
cartridge and cover A to
their original positions.
NOTE
>
When the optional offset catch tray is installed, close cover A first
before returning the tray to its original position.
>
If you continue to print with the offset catch tray folded, this may
cause a paper jam. Always use the printer with the tray open.
CAUTION!
When removing jammed paper, make sure that no pieces
of torn paper are left in the machine. If a sheet of paper
is wrapped around the heat roller, or when clearing a
jammed paper that is difficult or impossible to see, do
not try to remove it by yourself. Doing so can cause
injuries or burns. Switch off the machine immediately,
and contact your dealer or service.