Oki B6200dn Reference Manual Download Page 127

Page: 127 / 163

6.5 Checking Printed Pages

123

Select the [Notify Job End by E-mail] check box.

Enter the e-mail address for notification in [E-mail Address].

Click [OK].

6.5

Checking Printed Pages

This section explains how to check the total number of printed pages.

Checking Total Printed Pages on Meter

The total number of printed pages for different meters can be checked on the display of the
control panel.

The meter is divided according to the color modes.

The following procedure shows how to check the meter.

Press the <MENU> button to display the Menu screen.

Press the <

> or <

> button until [Meter Reading] is displayed and then press the

> button.

Press the <

> or <

> button until the desired meter is displayed.

After checking, press the <MENU> button.

Meter 1

Black/White Printing

Meter 2

Normally not used.

Meter 3

Color printing
Not available on this printer.

Summary of Contents for B6200dn




































































































































































Search results

Summary of Contents for B6200dn

Reviews:

Related manuals for B6200dn

Brands by name

Popular brands

Oki B6200dn, Reference Manual

Search results

Summary of Contents for B6200dn

Reviews:

Related manuals for B6200dn

Brands by name

Popular brands