manualshive.com logo in svg

Oki B4200, User Manual, Page: 106 / 226

Share
Download
Oki B4200 User Manual Download Page 106

IV - 24

Section 4 - Chapter 4 - OkiNet for TCP/IP

OKI OkiLAN 6020e User’s Guide

Running OkiNet for TCP/IP

To run the utility, double-click on the OkiNet icon. The
main 

OkiNet for TCP/IP

 screen will display.

By default, the 

All Print Servers

 view is selected and all

print servers attached to the subnet of the network from
which the OkiNet utility is running are listed.

Configuring the OkiLAN 6020e Using
OkiNet for TCP/IP

The following steps outline how to configure an
OkiLAN 6020e. To change settings of a previously
configured OkiLAN 6020e, follow the same procedure
but skip Step 3, as no prompt will appear.

1. Select the OkiLAN 6020e you wish to configure.

2. Select 

Configuration 

from the

 Print Server

 menu or

select the 

Configuration 

icon on the toolbar.

3. When prompted, enter the IP Address of the

OkiLAN 6020e.

4. Set the appropriate configuration by choosing the

applicable file folder tabs.

The following settings are configurable:

• TCP/IP

• EtherTalk

• NetWare

• Output Port

• NetWare Port

• SNMP

• NetWare Queues

• Protocols

• VINES*

• SNMP Traps

* 

May apply to other OkiLAN print server models.

Summary of Contents for B4200



































































































































































































































Reviews:

No comments