Oki B412dn User Manual Download Page 255

Page: 255 / 637

AirPrint Problems

Note

The printer may take a few minutes to connect to a network after it turns on. Check that the printer is connected to the network

before printing.
Update to the latest versions of Mac OS X and iOS before using.

Symptom

Check item

Solution

Reference

The "No AirPrint

Problems" message is

displayed on an iOS

device.

Is the printer turned on?

Turn the printer on.
If the printer is turned on, turn it off and

then back on, and then check whether

the problem is solved.

Turning the Printer On or Off

Is the printer connected

to the same network as

the iOS device?

Check that the printer is displayed on the

print screen of the iOS device.
If the printer is not displayed, check the

IP address.

Setting the IP address

Unable to print.

Is the printer turned on?

Turn the printer on.
If the printer is turned on, turn it off and

then back on, and then check whether

the problem is solved.

Turning the Printer On or Off

Is the printer connected

to the same network as

the iOS device?

Check that the printer is displayed on the

print screen of the iOS device.
If the printer is not displayed, check the

IP address.

Setting the IP address

Is there paper in the

tray?

Check the message informing you that

paper runs out.

Checking an Error Message (Error

Message Search)
If the Attention indicator or

Ready indicator Lights Up or

Flashes on the Operator Panel

Is there toner in the

toner cartridge?

Check the message informing you that

toner runs out.

Checking an Error Message (Error

Message Search)
If the Attention indicator or

Ready indicator Lights Up or

Flashes on the Operator Panel

Is AirPrint set to

[Enable]?

On the printer's display, check the

[AirPrint] setting. If [Disable] is

displayed, AirPrint is not available.

Printing with AirPrint

Is an error displayed?

On the printer's display, check the error

message and status.

Checking an Error Message (Error

Message Search)
If the Attention indicator or

Ready indicator Lights Up or

Flashes on the Operator Panel

254

Summary of Contents for B412dn






























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for B412dn

Reviews:

Oki B412dn, User Manual, Page: 255 / 637

Search results

Summary of Contents for B412dn

Reviews: