89 > B411/B431 Overlays and Macros (Windows Only)
3.
When each overlay has been tested, click
Exit
.
4.
Click the standard Windows
Close (X)
button, or
choose
Projects
>
Exit
to close Storage Device
Manager.
Defining overlays
This is the final step before the new overlays are ready for use.
1.
Open the Printers (called “Printers and Faxes” in
Windows XP) window via the
Start
menu or the
Windows Control Panel.
2.
Right-click on the Relevant PostScript printer icon and
choose
Printing Preferences
from the pop-up menu.
3.
On the
Overlay
tab, click the
New
button.
4.
In the
Define Overlays
window,
enter a suitable name (2) for this
overlay and choose which
page(s) (3) of your documents
will use this overlay.
5.
Enter the name of the overlay
file (4)
exactly
as it appeared in
the Storage Device Manager
project window. Remember that
this name is case sensitive.
If you forgot to note the overlay names when you created
them, you can find them using Storage Device Manager
to view the project file, or the printer’s Information Menu
to print a file list and identify them from there.
6.
Click
Add
(5) to add this overlay into the defined
overlays list.
7.
Click
OK
to close the Define Overlay window.
The new overlay now appears in the Defined Overlays list
in the printer properties window.
8.
Repeat the above procedure if you wish to define more
overlays.
9.
When done, click
OK
to close the printer properties
window.
2
3
4
5
Summary of Contents for B411d
