Okay LS 2615, Operating Instructions Manual

Page: 26 / 48

GB-9
CLEANING
- Take debris bag down and clear leaves in joints of
debris bag by using the brush (Fig. Q)
- Move the zipper and pour grass out (Fig. R1)
- Don‘t empty debris bag with hands - risk of injury (Fig.
R2).
- Take the Impeller Guard down and clear leaves in the
Impeller by using the brush (Fig. S1).
- Use the brush to clear leaves in the mouth of blower
tube (Fig. S2)
- Clear the surface of housing (Fig. S3,S4)
POWER CORD MAINTENANCE
If the supply cord needs replacing, the task must be car-
ried out by the manufacturer, the manufacturer’s agent,
or an authorised service centre in order to avoid a safety
hazard.
TROUBLESHOOTING
Attention! Always remove the plug from the mains
socket before starting any work on the machine.
•
The machine won’t start:
Check whether the switch
is in the “ON” position; check that the residual current
circuit breaker is not switched off and that no fuses
have blown in its electric circuit. If the machine still
won’t start have it inspected by an authorised cus-
tomer service firm.
• The machine won’t vacuum: Check whether the
leaf collection bag is full, otherwise have the machine
inspected by an authorised customer service firm.
• The machine won’t blow: Have the machine in-
spected by an authorised customer service firm.
• The shredder wheel is blocked: Check whether an
object has been sucked in that is too large; a piece of
wood, cardboard or other object has become jammed
between the impeller and shredder chamber. If the
shredder wheel remains blocked have the machine
inspected by an authorised customer service firm.
• If the machine vibrates, please immediately stop us-
ing it. Have the machine inspected by an authorised
customer service firm.
SPARE PARTS
Please contact our service department if you need acces-
sories or spare parts.
When working with this machine, do not use spare parts
other than those recommended by us. Using spare parts
not recommend by us can result in serious injuries to per-
sons or damage to the machine.
The following information should be provided when or-
dering spare parts:
• Type of machine
• Item number of the machine
Collection bag # 74800128
Waste disposal and environmental protection
Dispose of the machine properly after it is worn out. Dis-
connect the mains cable in order to prevent misuse. Do
not dispose of the machine with the household waste. In
the interest of environmental protection, take it to a col-
lection point for electric machines. Your responsible local
authority can provide you with addresses and operating
times. Also take the packaging materials and worn out
accessories to the appropriate collection points.
Only for EU countries
Do not discard electric tools in the household
waste!
In accordance with European Directive 2012/19/EC on
waste electrical and electronic equipment and its im-
plementation in national law, waste electric tools must
be collected separately for environmentally-compatible
re-use.
Recycling alternative to the return invitation:
Instead of returning the electric equipment, the owner is
alternatively obligated to take part in the proper recycling
in the case of relinquishment of ownership. The waste
equipment can also be taken to a collection facility which
disposes of it in the sense of the national recycling man-
agement and waste acts. This does not pertain to the ac-
cessory parts and auxiliary equipment without electrical
components accompanying the waste equipment.
WARRANTY
For this electric tool, the company provides the end user
- independently from the retailer‘s obligations resulting
from the purchasing contract - with the following war-
ranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by the
original purchasing document. For commercial use and
use for rent, the warranty period is reduced to 12 months.
Wearing parts and defects caused by the use of not fitting
accessories, repair with parts that are no original parts
of the manufacturer, use of force, strokes and breaking
as well as mischievous overloading of the motor are
excluded from this warranty. Warranty replacement does
only include defective parts, not complete devices. War-
ranty repair shall exclusively be carried out by authorized
service partners or by the company‘s customer service.
In the case of any intervention of not authorized person-
nel, the warranty will be held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.
REPAIR SERVICE
Repairs to electric power tools should only be carried out
by specialist electrical personel.
• Service:
Please contact your nearest Lagerhaus specialised
workshop.
You can find a Lagerhaus specialised workshop in your
vicinity in the Internet at „www.lagerhaus.at“.