Ojmar OTS ADVANCE, User Manual

Page: 42 / 96

OJMAR 42
 NOTE: If the following image is displayed in the Device manager, this means that
the controller has been installed correctly.
2.5 WINDOWS CONTROLLER INSTALLATION FOR OJMAR
NFC PROGRAMMER
The controllers supplied are compatible with the following operating systems:

Windows 2000.

Windows XP (32 and 64 bit).

Windows Vista (32 and 64 bit).
 Windows 7 (32 and 64 bit).

NOTE: All screens shown below correspond to Windows 7. If you have another
Operating System, these may be slightly different.
 NOTE: Install the controller before connecting the programmer to the PC.
1. Locate the “Drivers NFC” folder on the CD supplied by Ojmar.
2. There are two files in this folder. One for 32-bit Operating Systems
(VCP_V1.3.1_Setup) and another for 64-bit (VCP_V1.3.1_Setup_x64). Double click
on the file corresponding to your operating system.

NOTE: Click on the Windows "System" icon to find out whether your Operating
System is 32 or 64.bit. This option is located in the “Control Panel”.