Ojmar OTS ADVANCE User Manual Download Page 34

Page: 34 / 96

OJMAR 34

APPROXIMATE

MEASUREMENTS

External

(length x width
x height)

202 x 89 x 39 mm

2.2.1

Main Screen

The main screen of the Ojmar NFC programmer displays the following information:

Operations with keys: See Section 2.2.2.

Operations with locks: See Section 2.2.3.

Configuration: See Section 2.2.4.

Date and time: Displays the date and time of the programmer. This information
will be used when recording the locks and keys.



NOTE: The date and time are configured automatically when the programmer is

connected to the PC and synchronised with the OTS Management Software via the
events window (See Section 4.8).

Battery level: Displays the programmer battery level.



NOTE: Do not switch the programmer off during charging

Summary of Contents for OTS ADVANCE

































































































Search results

Summary of Contents for OTS ADVANCE

Reviews:

Related manuals for OTS ADVANCE

Brands by name

Popular brands

Ojmar OTS ADVANCE, User Manual

Search results

Summary of Contents for OTS ADVANCE

Reviews:

Related manuals for OTS ADVANCE

Brands by name

Popular brands