•••• www.ojedausa.com • [email protected] • Pg. 9 ••••
MAINTENANCE GUIDELINES
Regularly and carefully cleaning and defrosting the equipment prevents deterioration and product
alteration.
REMOVAL OF FROST
It is recommended to remove the frost accumulated before reloading the freezer or anytime when one
quarter inch of frost has accumulated.
The unit will have to be manually defrosted. The manual defrost frequency will depend on the units
usage, environment, and the amount of frost accumulated.
1.
Make sure the unit is moved close to a floor drain or a means of collecting or containing the
water is used.
2.
Unplug the unit until all the frost is gone.
3.
When the ice has melted wipe up any water left on the freezer floor.
4.
Allow the freezer to refrigerate and cycle before placing the product back into the freezer
To defrost while keeping the freezer plugged in place a clean dry soft cloth over the product to catch the
frost that will be removed. Remove the frost using a plastic scrapper trying to eliminate as much frost as
possible.
CLEANING THE UNIT
Wash any removable parts, the freezer interior, and exterior with mild detergent and warm water. Wipe
dry.
DO NOT USE HARSH CLEANERS ON THESE SURFACES.
Do not use razor blades or other
sharp instruments, which can scratch the appliance surface.