Oilon VSi 6-14, Installation And Operation Manual

Page: 17 / 74

Screw positions, VSi Screw positions, VMi
2. Pull the crown plate towards yourself and lift it off of the heat pump.
2.6.2 Brine circuit and fill and bleed unit installation, VSi
Use special care when making the connections.
The heat pump case has an opening for brine circuit pipes on both sides.
1. Depending on the required orientation, remove the cover plate from the opening on
the left or right side.
Hose orientation, VSi ver. 1
Left Right
2. Connect the connecting pipe between the brine circuit circulation pump and the
flexible hoses. The connecting pipe is included in the accessory kit.
3. Install the fill and bleed unit to the return side of the heating circuit, see the figure
below.
Hoses, VSi ver. 1
Pos. Item
1 Brine circuit, return
2 Brine circuit, flow
3 Filling bottle
M8011 2204EN 15 (70)