Oilon Lampoassa RE 28-48, Installation And Operation Manual

Page: 32 / 78

Changing the DHW temperature
setpoint.
DHW time program (time program
4). Activate the time program from
line 1620.
5.7 Changing the user level
The heat pump automation has four distinct user levels. The user level influences the
menu structure and the setpoints displayed in the menus. The user levels are end
user , commissioning , engineer , and OEM .
The end user view is the default interface view. The end user and commissioning
levels are sufficient for performing most actions.
Change the user level from the settings menu (gear icon).
The commissioning level does not require a password, but the engineer and OEM
levels are password-protected. The current user level is indicated by a number in the
status bar.
● No number: end user (no password)
● 1: commissioning (no password)
● 2: expert (password 00017)
● 3: OEM level (password 24358)
1. Enter the settings menu (gear
symbol), and select Expert .
2. Select the user level. 3. Enter the password (if
necessary).
Re g io n a l s e t t in g s
Sp e cia l o p e ra t io n s
Settings
Enduser
4. The interface will inform you that
you have logged in.
5. The menus applicable to the
selected user level are now
shown.
Returning to end-user level.
30 (74) M8009 2147EN