Oilon Lampoassa RE 28-48, Installation And Operation Manual

Page: 27 / 78

Once you are on the correct page,
push in the control knob again.
Move from the status bar to one of
the setpoints by turning the control
knob.
Go back by moving the cursor to the lower right-hand corner and
pushing in the control knob.
5.2 Commissioning menus
Language and time settings
The menu settings are preset at the factory. However, if the commissioning menu
appears, go through the settings as indicated below. The images below show the
settings that suit most situations unaltered.
To bypass the settings pages in the commissioning menu, select
Skip
in the lower
left-hand corner of the screen. If you select
Continue
by accident, select
Skip
in the
following screens until the commissioning wizard menus have been bypassed.
Commissioning menus can be accessed later from the service menu. Usually, it is
advisable to change the settings later through the parameter menu.
Initially, the display’s language is
English.
1. The interface language can be
changed in the first screen.
2. Move to the next page by
pressing the button in the lower
right-hand corner.
M8009 2147EN 25 (74)