Adjustments and checks before use
19
5.7
Checking and adjusting the front/rear sides of the rail
If the rail comes into contact with the escaper, or the clearance between the rail and escaper is
too large, when the machine is operated, loosen the rail fixing bolt and adjust the rail either
backward or forward.
After making an adjustment, be sure to tighten the rail fixing bolt.
If the rail hits against the escaper, the escaper will not function properly.
If the clearance between the rail and the escaper is too large, screws may fall into the machine.
After making an adjustment, try making a vibration readjustment by referring to
adjusting the rail vibration page 16
Rail fixing bolt
Adjust the rail either backward or forward.
