Ohmic instruments UPM-DT-1000PA, User Manual

Page: 17 / 24

11
RS232 Print Details
RS232 Print Interface: Baud Rate = 9600, 8 Bit Data, No Parity
Print Output Format
: “0.0000 g” (grams mode) or “0.000 W” (custom Watts mode)
measurement is displayed as the last line of the printout. An unstable measurement is
indicated by a “?” at the end of the print line (i.e., 0.0000 g?). Sample Printout below:
01/01/2019 16:24:19
Balance ID: 123456789
Balance Name: PX84/E
User Name:
Project Name:
Weighing
1.0249 g
Gross:
1.0249 g G
Net: 1.0249 g N
Tare: 0.0000 g T
Communication Commands
RS232 Communication Interface: Baud Rate = 9600, 8 Bit Data, No Parity
IP Immediate Print of displayed weight (Stable or Unstable)
SP Print displayed weight (will not print until measurement is stable)
CP Continuous Print (reading only)
Z Same as pressing Zero key
T Same as pressing Tare key
ON Turns UPM-DT-xPA on
OFF Turns UPM-DT-xPA off
PRINTING AND COMMUNICATIONS