SonarMite v3.0 (c)2009 Lymtech LLC
Page 15
6/13/2009
SonarMite Serial Commands
☺
(^H)elp
Pressing ^H (Contol H) will display the following help information as an aid memoir
to the available commands…
^Help,Format,Version,Id,Save,[Reset,Load,U/Dsos]
Commands shown in parenthesis [ ] are only available in the
SYS>
format.
Memory Operations
☺
(^R)eset
Pressing ^R (Contol R) will reset the SonarMite to its default values, these values are
saved in Flash memory and set in current working RAM memory (
only available in
the SYS> output mode
).
☺
(^L)oad
Pressing ^L (Contol L) will reload the Flash memory into the current working
memory. (
only available in the SYS> output mode
).
☺
(^S)ave
Pressing ^S (Contol S) will save the current working memory area to Flash memory
to become the system settings on reboot.
