OHAUS Frontier FC5714, Service Manual, Page: 17 / 43

SERVICE MENU 17
Page 17 of 43 SERVICE MANUAL FC5718/R © OHAUS Corporation
2.1.4 Submenu Software status
Here you can read of the software status.
• Activate the operation menu as described under „Activation of the operation
menu (Part 1)“.
• Turn the potentiometer, until the special digit „S“ appears in the service
display.
Now the software status is indicated.
2.1.5 Submenu Software status of the frequency converter
Here you can read of the software status of the frequency converter.
• Activate the operation menu as described under „Activation of the operation
menu (Part 1)“.
• Turn the potentiometer, until the special digit „r“ appears in the service
display.
Now the software status of the frequency converter is indicated.
2.1.6 Submenu Error memory
Here the 99 last occurred error messages can be indicated.
• Activate the operation menu as described under „Activation of the operation
menu (Part 1)“.
• Turn the potentiometer, until the special digit „E“ appears in the service
display.