22
Defender 5000 Indicators Service Manual
2.6 Discrete I/O
Long press the button
to enter the Main
Menu.
Select Application Mode by pressing the soft key
corresponding to the icon
.
Press the soft key corresponding to the icon
to
enter the sub-menu Application Mode.
Enable
The current selected application mode can't be set Off.
Discrete I/O setup menus allow the configuration of 2 inputs and 4 outputs depending on different
application mode.
Reset
If Reset is selected and confirmed, all the submenu value will be set to default.
For more details, see the table below.
Application Mode
& Discrete I/O
Options
(bold is default)
Weighing
Enable
On
, Off
Discrete Input1
Off
, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input2
Off
, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Output1
Off
, Overload, Underload, Zero
Discrete Output2
Off
, Overload, Underload, Zero
Discrete Output3
Off
, Overload, Underload, Zero
Discrete Output4
Off
, Overload, Underload, Zero
Counting
Enable
On
, Off
Discrete Input1
Off
, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input2
Off
, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Output1
Off
, Overload, Underload, Zero
Discrete Output2
Off
, Overload, Underload, Zero
Discrete Output3
Off
, Overload, Underload, Zero
Discrete Output4
Off
, Overload, Underload, Zero
Check
Enable
On
, Off
Discrete Input1
Off
, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input2
Off
, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Output1
Off
, Under, Over, Accept, Under/Over, Overload,
Underload, Zero
Discrete Output2
Off
, Under, Over, Accept, Under/Over, Overload,
Underload, Zero
Discrete Output3
Off
, Under, Over, Accept, Under/Over, Overload,
Underload, Zero
Discrete Output4
Off
, Under, Over, Accept, Under/Over, Overload,
Underload, Zero
Percent
Enable
On
, Off
Dynamic
Enable
On
, Off
Discrete Input1
Off
, Zero, Tare, Clear Tare, Print, Start, Reset
Discrete Input2
Off
, Zero, Tare, Clear Tare, Print, Start, Reset
