Ogawa SMART RELUXE OG6383, User Manual

Page: 10 / 28

15 16
9. SPOT/ PARTIAL
The Spot or Partial Back Massage
This button allows the user to select spot massage for any part on the back. Press this button once to
activate spot massage at the desired position. Press this button again to switch to Partial function.
While running spot massage, when this button is pressed again, the massage will change from spot to
partial. The massage will take the spot position as the central to perform partial massage at a distance
of approximate 8 cm. Press again to stop the function.
The Partial Back Massage
14.SPEED
Speed Adjustment Button – 5 levels of speed available
After activating the swedish, tapping, shiatsu or clapping function, user can press the button to adjust
the massage speed in increasing mode, which is from slow to fast in one cycle.
15.FULL AIR
Full Body Air Pressure Massage Button
Press this button to activate the full body air pressure massage, press again the button to turn it off.
16.PARTIAL AIR
Manual Air Pressure Massage Button
Press this button to activate manual air pressure massage for footrest> hand> shoulder> Stop in a
cycle.
17.INTENSITY
Intensity Adjustment Button for Air Pressure – 5 levels of intensity available
After activating the Air Pressure function (Auto and Manual), press this button to adjust the air pressure
intensity in increasing mode, which is from weak to strong in one cycle.
18.FOOT ROLL
Foot Roll Function Start/Stop Control Button
Press once to activate the roller on foot, press again to stop the foot roll function.
10.UPWARD/DOWNWARD
Massage Position Adjustment Button for Spot and Partial Massage
In the spot or partial massage, user can use these two buttons to adjust the massage position by long
pressing the UPWARD/DOWNWARD button and release the button when the massage roller reach the
desired position.
Remark: When auto back scanning unable to satisfy your need, user can manually adjust the shoulder
height position within 10 seconds after scanning.
12.STRENGTH
Strength Adjustment Button for Kneading
– 5 levels of strength available
After activating the Kneading function, user can press the button to adjust the massage strength to
“Lv1> Lv2> Lv3> Lv4> Lv5” in one cycle.
13.WIDTH
Back Massage Width Adjustment Button
– 3 levels of width available
After activating the tapping, shiatsu, clapping or rolling function, user can press the button to adjust
the massage width to “narrow> medium> large” in one cycle.
11.Manual Massage Function
KNEADING, SWEDISH, TAPPING, SHIATSU, CLAPPING, ROLLING
Press this button to activate the rhythmic kneading manual massage function for a full back massage.
Every time this button is pressed, the manual massage function will change in the sequence of
“KNEADING> SWEDISH> TAPPING> SHIATSU> CLAPPING> ROLLING> stop”.
When the manual massage function is operating, press this button to change the rhythmic mode of
manual massage between 1 and 2.
MODE