Ofs Softcontrol Data/F, Manual

Page: 15 / 46

15
9.3.1. Terminal assignment Softcontrol Data/F
The electrical connection is made according to the following table
(only connected terminals listed):
term. assignment comment colour
1 GND Supply voltage ground
brown
2 U
On
Supply voltage 24V white
3 GND GND – sensor
white
4 DS Sensor black
5 GND GND - sensor
black
6 Sens- Sensor brown
8 Sens+ Sensor
blue
13 4..20mA Measured value output 4…20mA (GND) user
14 4..20mA Measured value output 4…20mA (+)
user
15
Valve SW GND GND
brown
16
Valve SW 24V 24V
white
17
Valve RW GND GND
brown
18
Valve RW 24V 24V
white
19 Switching output 1
potential-free fault message limit value alarm
user
20 Switching output 1
potential-free fault message limit value alarm
user
21 Switching output 2
potential-free fault message
limit value (sensor) alarm
user
22 Switching output 2
potential-free fault message
limit value (sensor) alarm user
25 Input 1 – GND Offline – potential-free contact
user
26 Input 1 – 24V Offline – potential-free contact
user
27 Input 2 – GND Water meter – potential-free contact
user
28 Input 2 – 24V Water meter – potential-free contact
user
29 Input 3 – GND
External alarm or SALIS sensor
– potential-free contact user
30 Input 3 – 24V
External alarm or SALIS sensor
– potential-free contact user
31 Input 4 – GND Enable measurement – potential-free contact
user
32 Input 4 – 24V Enable measurement – potential-free contact
user