Office Star Products Space Seating SpaceGrid 529-3R2V30, Operating Instructions

Page: 1 / 2

© Office Star Products novembre 2015
SPACE LIMITED WARRANTY
SPACE® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs.
or less. The 63-37A773HM, 75-7A773, 75-37A773, 75-47A773 and 839-11B35WA are for persons weighing 400 lbs. or less, the 818 & select 829’s with self-
adjusting mechanism are 300 lbs. or less and the 15-37A720D is 325 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse,
negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover
cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting
from use of this product. When usage is more than 40 hours per week, a five year warranty on all parts applies. Fabric is warranted for one year. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
All Space chairs meet or exceed ANSI BIFMA standards.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty
will be paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net
, by Fax 1-909-930-5629, or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are securely
tightened.
3. Check that all bolts screws and knobs are tight every three months or
as needed.
4. Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.
5. Do not use chair as a stepladder.
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.
529-4R2V30 & 529-E3R2V30
(not shown)
529-3R2V30 / 529-4R2V30 / 529-E3R2V30
SpaceGrid
®
BACK VISITOR’S CHAIR
OPERATING INSTRUCTIONS
529-3R2V30 / 529-4R2V30 / 529-E3R2V30
CHAISE VISITEUR À DOSSIER EN SpaceGrid
®
INSTRUCTIONS DE MONTAGE
ÉTAPE 1 ÉTAPE 2
ÉTAPE 3
2
10
11
5
4L
7
1
6
X3
8
9
X3
X3
X3
11
X4
X4
X3
11
4R
1
2
7
5
3
PIÈCE QTÉ
1.
Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Coussin du siège . . . . . . . . . . . . . . . . . . . . .1
3.
Dossier . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
4. Bras (4L et 4R) . . . . . . . . . . . . . . . . . . . . . .2
5.
Petites rondelles plates . . . . . . . . . . . . . . . .6
6. Grandes rondelles plates . . . . . . . . . . . . . . .4
7.
Vis de bras . . . . . . . . . . . . . . . . . . . . . . . . . .6
8. Vis de base . . . . . . . . . . . . . . . . . . . . . . . . .4
9.
Vis du dossier . . . . . . . . . . . . . . . . . . . . . . .3
10. Support du dossier (préinstallé) . . . . . . . .1
11.
Clé Allen (non montré) . . . . . . . . . . . . . . . .1
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier les
quantités des pièces.
ÉTAPE 1
Fixez les bras (4L & 4R) au coussin de siège (2) en utilisant trois petites rondelles plates (5) et trois vis de bras (7) pour chaque bras,
SERREZ
TOUTES LES VIS COMPLÈTEMENT AVEC CLÉ ALLEN (11).
ÉTAPE 2 Fixer la base (1) au coussin de siège (2) avec la flèche vers l’avant de la chaise, en utilisant quatre grandes rondelles plates (6) et quatre vis de
base (8).
SERREZ TOUTES LES VIS COMPLÈTEMENT AVEC CLÉ ALLEN (11)
ÉTAPE 3
Fixer le support du dossier (10) à l’arrière du base (1) en utilisant trois vis du dossier (9) .
SERREZ TOUTES LES VIS COMPLÈTEMENT
AVEC CLÉ ALLEN (11)
ATTENTION: AVANT D’UTILISER LE FAUTEUIL, S’ASSURER D’AVOIR SERRÉ COMPLÈTEMENT TOUTES LES VIS.