Office Star Products SPACE 801 Series, Operating Instructions

Page: 1 / 2

801 SERIES
VISITOR’S CHAIR
OPERATING INSTRUCTIONS
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all screws are tight every three months
or as needed.
4. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
5. Do not use chair as a stepladder.
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.
LIMITED WARRANTY
SPACE® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons
weighing 250 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism,
rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may
result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of
this product. When usage is more than 40 hours per week, a five year warranty on all parts applies. Fabric is warranted for one year.
This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
To make a warranty claim, contact Parts Department via e-mail
parts@officestar.net
, by Fax 1-909-930-5629, or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. Provide model number and description of the
problem and obtain confirmation number. At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components
covered by warranty will be paid by Office Star Products.
SÉRIE 801
CHAISE DE VISITE
INSTRUCTIONS DE MONTAGE
PIèCE QTÉ
1. l’assemblage de la base . . . . . . . . 1
2.
Glissière ou Roulette . . . . . . . . . . 4
3. Dossier . . . . . . . . . . . . . . . . . . . . . 1
4.
Screw . . . . . . . . . . . . . . . . . . . . . . . 1
5. Pin de plastique
(installés à l’avance) . . . . . . . . . . . . . 2
6. Clé Allen . . . . . . . . . . . . . . . . . . . 1
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier
les quantités des pièces.
ÉTAPE 1
Tourner l’assemblage de la base (1) à l’envers, introduire les glissières ou les roulettes (2) dans l’assemblage de la base (1) en les poussant
jusqu’à ce que vous sentiez ou écoutiez un bruit sec sur chaque glissière ou roulette (2).
ÉTAPE 2 Tournez l’assemblage soigneusement à l’endroit, glissez le dossier (3) sur l’assemblage de la base (1).
ÉTAPE 3
Alignez les Pin de plastique (5) avec les trous dans l’assemblage de la base (1), poussez les Pin de plastique (5) jusqu’à ce que vous sentiez ou
écoutiez un bruit sec. Fixez le dossier (3) en utilisant une vis (4), CONSULTEZ LA FIGURE A. SERREZ LA VIS (4)
FERMEMENT EN UTILISANT UNE CLÉ ALLEN (6).
ATTENTION: AVANT D’UTILISER LE FAUTEUIL, S’ASSURER D’AVOIR SERRÉ COMPLèTEMENT TOUTES LES VIS.
© Office Star Products Octobre 2008
ÉTAPE 1
ÉTAPE 2
2
3
4
1
ÉTAPE 3
1
3
1
FIGURE A
6
X4
X1
5