Office Star Products Pro-Line II ProGrid 511342AL, Operating Instructions

Page: 1 / 2

511342AL / 511343AT
FAUTEUIL DE DIRECTION À DOSSIER ProGrid®
INSTRUCTIONS DE MONTAGE
511342AL / 511343AT
EXECUTIVE ProGrid® BACK CHAIR
OPERATING INSTRUCTIONS
Front
Bac
k
1
2
3
4
FEATURES
• SEAT HEIGHT ADJUSTMENT
To raise seat height, remove pressure from seat and lift lever (1) up.
To lower seat height, sit on chair and lift lever (1).
NOTE: It is normal for chair to slightly lower under body weight.
• TILT TENSION ADJUSTMENT
Turn knob (2) clockwise to increase tilt tension and turn
knob (2) counter-clockwise to decrease tilt tension.
• SEAT SLIDER
Lift lever (3) to slide seat, release lever (3) when desired position is
reached.
• BACKREST LOCKING ADJUSTMEN T
Turn knob (4) clockwise to lock backrest in position, to unlock,
turn knob (4) counter-clockwise and lean back to release
anti-kick back mechanism.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (5) in to allow the arms to move
up or down freely. Release button (5) once the desired height is
reached. Slide arm pads forward/backward.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs
are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic
cover as head covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
LIMITED WARRANTY
Pro-Line II chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
To make a warranty claim, contact Parts Department. Provide model number and description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory.
Return freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five
year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
511342AL
© Office Star Products Octobre 2012
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que les
quantités des pièces sont correctes.
ÉTAPE 1 Insérer cinq roulettes (2) dans la base (1), les pousser très fort jusqu’à ce que vous entendiez ou sentiez la roulette (2) s’enclencher.
ÉTAPE 2 Fixer le mécanisme (4) au coussin du siège (5) avec la flèche vers l’avant du siège avec quatre vis moyennes (9). RESSERRER COMPLÈTEMENT
TOUTES LES VIS MOYENNES (9) AVEC LA CLÉ ALLEN (12).
ÉTAPE 3 Fixer le support du dossier (11) à l’arrière du mécanisme (4) avec quatre vis longues (10). RESSERRER COMPLÈTEMENT TOUTES LES VIS
LONGUES (10) AVEC LA CLÉ ALLEN (12).
ÉTAPE 4 Aligner les trous des accoudoirs (7L et 7R) sur les trous de l’assemblage du dossier (6), fixer les accoudoirs (7L et 7R) à l’assemblage du dossier (6)
avec une vis courte (8) pour chaque accoudoir. RESSERRER COMPLÈTEMENT TOUTES LES VIS COURTE (8) AVEC LA CLÉ ALLEN (12).
ÉTAPE 5 Insérer le cylindre pneumatique (3) dans la base (1). Placer le siège assemblé sur le cylindre pneumatique (3) et mettre de la pression vers le bas.
ATTENTION : AVANT D’UTILISER LE FAUTEUIL, VOUS ASSURER D’AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES VIS.
PIèCE QTÉ
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulettes . . . . . . . . . . . . . . . . . . . . 5
3. Vérin pneumatique . . . . . . . . . . . . 1
4. Mécanisme . . . . . . . . . . . . . . . . . . 1
5. Coussin du siège . . . . . . . . . . . . . . 1
6. Assemblage du dossier . . . . . . . . . 1
7. Accoudoirs (7L et 7R) . . . . . . . . . . 2
8. Vis courtes . . . . . . . . . . . . . . . . . . . 2
9. Vis moyennes . . . . . . . . . . . . . . . . 4
10. Vis longues . . . . . . . . . . . . . . . . . 4
11. Support du dossier (préinstallé) . . 1
12. Clé Allen (non montré) . . . . . . . . . 1
2
3
5
4
9
11
7L
7R
6
1
10
8
5
511343AT