D2 POCKET DESK
TOOLS YOU'LL NEED
WHAT IS IN THE BOX?
1 - desk top
1 - desk drawer
1 - desk beam
4 - casters
1 - left facing leg support
1 - right facing leg support
2 - magnetic catches
2 - drawer slides (pre-attached)
PROVIDED - 1 allen key
NOT PROVIDED - 1 phillips
head screw driver
PLEASE read instructions
through before assembly
!!
HELP! 1-800-958-OFFI
what is in the box?
CONTINUE ONTO THE 2ND PAGE...
1 - desk top
1 - desk drawer
1 - desk beam
1 - left facing leg support
1 - allen key
1 - right facing leg suppor
4 - casters
2 - magnetic catches
2 - drawer slides (pre-attached)
4 - magnetic
catch screws
26 - button head
screws
Love Design. Get Offi!
www.offi.com
IMPORTANT: DO NOT
TIGHTEN ANY
BUTTON
HEAD SCREWS UNTIL
ALL SCREWS ARE
LOOSELY ATTACHED
LETS GET STARTED!
1. UNPACK all components
Figure A
1. FLIP desktop upside down
2. ATTACH the 2 magnetic
catches as shown, using
the 4 magnetic catch
screws provided,
making sure the horizontal
bars on the catch are
facing the back edge of the
desk top
Figure A
Figure B
Figure B
1. LINE UP the legs as
shown - brackets facing
inwards
***NOTE that there is a left
and a right leg support,
make sure that the cut out
between the plates is
closer to the back***
2. LOOSELY ATTACH the
legs using 8 of the button
head screws and the allen
key provided - DO NOT
FULLY TIGHTEN!!
