OETIKER EPC 01 Instruction Manual Download Page 66 | Manualshive

Page: 66 / 98

OETIKER EPC 01 Instruction Manual Download Page 66

66

www.oetiker.com

OETIKER EPC 01

MaInTenanCe anD RePaIR

Issue 11.22

08905306

10 4 2 Aligning the pincer head

WARNING

Crush hazard when aligning the pincer head!

fingers can be crushed or severed when the sTaRT button is pressed or when a start is initiated
by an external control.

►

Do not reach into the closure area of the pneumatic pincer.

►

align the pincer head only when the power supply and compressed air supply are discon-
nected.

1.  Disconnect the compressed air supply and switch off the Control Unit.
2.  Undo the locknut (1).
3.  Undo the union nut (2) slightly so that the pincer head (3) can be aligned.
4.  align the pincer head (3) and hold it in the desired position.
5.  Tighten the union nut (2).
6.  Tighten the lock nut (1) against the union nut (2).
7.  Proceed with the pincer test (

see chapter 4.4

).

10 4 3 Changing the pincer jaws

NOTICE

Pincer jaws to be replaced are available as a pincer jaw replacement kit. In order to ensure the
fast and accurate delivery of spare parts, a complete purchase order is essential.

It must include the following information:

Product name, part number, shipping method, full address.

Changing the pincer jaws – HO pincers

a number is engraved on the pincer jaws. Use this number to order a pincer jaws replacement kit. only the desig-
nated pincer jaws must be fitted into the pincer head.

1

2

3

«
...
64
65
66
67
68
...
»

Summary of Contents for EPC 01



































































































Reviews:

No comments