Oerlikon GCB51K, Operating Instructions Manual

Page: 86 / 96

8. Drawings / Tables
Page 80 Customer: Basis Version 01 Order: 000000-000 Edition: 12.17
8.1 Technical Data
8.1.1 Pump-data pump type GC...
Pump data extruder pumps
Pump type GCB51K GCV50K GCV90K GCH18K GCH35K GCH50K GCH75K
Drawing No. GCB51K-
1-102Z
GCV50K-
1-106Z
GCV90K-
1-105Z
GCH18K-
1-115Z
GCH35K-
1-115Z
GCH50K-
1-109Z
GCH75K-
1-110Z
Article No. 1-010-6090 1-010-5230 1-010-2482 1-010-2505 1-010-0114 1-010-2481 1-010-6441
Output capacity cc/rev 25 45 90 180 350 500 750
Weight kg 16 34 63 110 180 180 460
Sense of rotation *1 clockwise clockwise clockwise clockwise clockwise clockwise clockwise
Heating method electrical electrical electrical electrical electrical electrical electrical
Installed heating power kW/V 0,5/380 –
0,88/480
1,0/380 –
1,5/480
2,0/380 –
3,2/480
2,8/380 –
4,4/480
4,4/380 –
6,6/ 460
4,4/380 –
6,6/ 460
12,2/380 –
19,6/480
Max. allowable operating
temperature °C 300 300 300 300 300 300 300
Design temperature °C 350 350 350 350 350 350 350
Max. allowable cleaning
temperature °C 450 450 450 450 450 450 450
Max. allowable inlet
pressure bar 100 100 100 100 100 100 100
Max. allowable outlet
pressure bar 350 350 350 350 350 350 350
Max. allowable differential
pressure bar 250 250 250 250 250 250 250
Max. allowable drive
torque *2 Nm 500 850 1200 2600 5200 5200 10500
*1 View on pump shaft
*2 To protect the pump, it must be inserted a suitable mechanical safety device against overload on the drive side under any circumstances.
This safety device has to be set to an overload torque of at most 90% of the max. allowable pump torque.