Oerlikon Fairfield Torque-Hub S40B Series, Service Manual

Page: 22 / 48

22
Planetary Final Drive Service Manual
Input Carrier Subassembly
CAUTION: Safety glasses must be worn during these next steps .
1.
Place Planet Gear (2B) onto press table. Install Retaining Ring (2G) into the groove of the
Planet Gear (2B).
3.
Apply grease and install Thrust Washer (2E) onto the bore of the Planet Gear (2B)
4.
Use Tool T-159309 and install Bearing Cups (2C), with wide face into bore of the Planet
Gear (3F). Insure that Bearing Cup has seated completely against Retaining Ring and
Thrust Washer in the respective sides.
5.
Install Bearing Cone (2D) into Bearing Cup (2C) on both sides of the Planet Gear (2B).
6.
Apply grease and install Thrust Washer (2F) on planet shaft bore top side in Carrier (2A)
planet gear window.
7.
Slide Planet Gear (2B) assembly into planet window of Carrier (2A).
8.
Align planet shaft bore in Planet Gear (2B) with Thrust Washer (2F) bore and Carrier (2A)
planet shaft bore.
Continued on Next Page