background image

UNPACKING

After unpacking the OEMTOOLS

 40 Gallon (150L) Parts 

Washer, inspect carefully for any damage that may have 

occurred during transit. Check for loose, missing, or 

damaged parts. If any damage is observed, a shipping 

damage claim must be filed with carrier. DO NOT use 

Parts Washer if broken, bent, cracked or damaged parts 

(including labels) are noted. Any Parts Washer that appears 

damaged in any way, operates abnormally or is missing 

parts should be removed from service immediately. If you 

suspect that the Parts Washer was subjected to a shock 

load (a load that was dropped suddenly, unexpectedly, 

etc.), immediately discontinue use until it has been checked 

by a factory authorized service center.

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and 
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal 
injury and/or damage to product or property. Please retain instructions for future reference.

The following safety information is provided as a guideline to help you operate your product under the safest possible conditions. 

Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or 

not followed. The following safety instructions are to provide the user with the information necessary for safe use and operation. 

Please read and retain these instructions for the continued safe use of your product. Failure to follow instructions listed below 

may result in serious injury. In addition, make certain that anyone who uses the equipment understands and follows these 

safety instructions as well.

 Operating Instructions and Parts Manual 

24803

FOR CUSTOMER SERVICE

Technical Question?

 

CALL 1-866-458-2472

[email protected]

Thank you very much for choosing an OEMTOOLS

 Product!

For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: ___________

Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product 

before you begin using it. This product is designed for certain applications only. OEMTOOLS

 cannot be responsible for issues 

arising from modification. We strongly recommend this product is not modified and/or used for any application other than that for 

which it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first 

contacted customer service to determine if it can or should be performed on the product.

Explanation of Safety Signal Words

WARNING:

  Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION:

  Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION

:

  Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may  

result in property damage.

NOTES

:

 Provide clarity and helpful information.

40 GALLON (150L)  

PARTS WASHER

1

6/18

2018 OEMTOOLS

WARNING

Summary of Contents for 24803









Reviews: