background image

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect 

yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions 

could result in personal injury and/or damage to product or property. Please retain instructions for future reference.

This is the safety alert symbol.  It is used to alert you to potential personal injury hazards. Obey all safety 

messages that follow this symbol to avoid possible injury or death.

The following safety information is provided as a guideline to help you operate your A/C Vacuum Pump under 

the safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety 

or safe handling instructions are not known or not followed. The following safety instructions are to provide 

the user with the information necessary for safe use and operation. Please read and retain these instructions 

for the continued safe use of your service system. Failure to follow instructions listed may result in serious 

injury. In addition, make certain that anyone that uses the equipment understands and follows these safety 

instructions as well.

Operating Instructions and Parts Manual 

24500

03/14

2014 ©OEM-TOOLS

For Customer serviCe

Technical Question?

 

CALL 1-866-458-2472

[email protected]

1.8 CFm siNGLe stAGe

vACuum PumP

WARNING

uNPACKiNG

After unpacking unit, inspect 

carefully for any damage that 

may have occurred during transit. 

Check for loose, missing, or 

damaged parts. If any damage 

is observed, a shipping damage 

claim must be filed with carrier.  

Do not use product if broken, 

bent, cracked or damaged parts 

(including labels) are noted.

Summary of Contents for 24500











Reviews: