background image

5

Operating Instructions and Parts Manual 

24493/24494/24499

11/18

2018 OEMTOOLS

R2 RECHARGEABLE 

SPEED RATCHET

1.  DO NOT expose your battery pack or cordless tools to 

water or rain, or allow them to get wet. DO NOT use in 

a hyperbaric environment. DO NOT use oil or solvents 

to clean or lubricate your battery pack. This plastic 

casing will become brittle and crack, causing a risk of 

injury.

2.   Store battery pack at room temperature away from 

moisture. DO NOT store in damp locations, where 

corrosion of terminals may occur. Permanent capacity 

loss and damage can result if the battery pack is stored 

for long periods of time at high temperatures (over 

 

95°F / 35°C).

3.  To reduce the risk of injury or explosion, never burn or 

incinerate a battery pack even if it is damaged, dead or 

completely discharged. When burned, toxic fumes and 

materials are created.

4.  DO NOT modify the battery pack or charge it with other 

chargers; that may cause personal injury or damage. 

5.  If an unusual smell, color or amount of heat occurs 

when battery pack is being charged or stored, stop 

using it immediately and take it to a service agent.

6. Always dispose of your battery pack according to local 

regulations. Contact a recycling agency in your area for 

recycling locations. Even discharged batteries contain 

some energy. Before disposing, use electrical tape to 

cover the terminals to prevent the battery pack from 

shorting, which could cause a fire or explosion.

3.  Keep the charger clean. There is a risk of electrical 

shock if it is dirty. 

4. Check the charger, cable and plug before each use. 

DO NOT use the charger if you detect any damage. 

DO NOT open up the charger itself. Have it repaired 

by qualified technical staff using original spare parts 

only. There is an increased risk of electric shock from 

damaged chargers, cables and plugs. 

IMPORTANT SAFETY INSTRUCTION FOR 

BATTERY PACK

Failure to follow all instructions listed below may result in 

damage and lifetime decline of lithium-ion battery pack.

Please fully charge the lithium-ion battery powered power 

tool before first use. 

7. When using R2 Rechargeable Speed Ratchet with 

lithium-ion batteries, usage must halt and the batteries 

charged immediately when LED indicator light shows 
continuous red (low voltage protection). This is in order 

to prevent damage and ensure product lifespan.

 

8.  When lithium-ion battery packs are left unused for over 

3 months, they must be charged before use in order to 

maintain their lifespan.

9.  Lithium-ion battery pack must be charged periodically 

in order to maintain lifespan.

10. When battery pack is not in use, keep it away from 

other metal objects, such as paper clips, coins, keys, 

nails, screws, or other small metal objects that can 

make a connection from one terminal to another. 

Shorting the battery terminals together may cause 

sparks, burns, or a fire.

IMPORTANT SAFETY INSTRUCTION FOR 

BATTERY CHARGER

WARNING

Charge only the R2 Rechargeable Speed 

Ratchet lithium-ion battery pack in the R2 Rechargeable 

Speed Ratchet lithium-ion battery charger. Other types 

of batteries may cause personal injury and damage. To 

reduce the risk of electric shock, DO NOT allow water to 

come into contact with the plug.

WARNING

To reduce the risk of injury, always unplug 

the charger and remove the battery pack from the charger 

before performing any maintenance. Never disassemble 

the battery pack or charger. Contact a service agent for 

ALL repairs. To reduce the risk of injury and damage, 

never immerse your battery or charger in liquid or allow a 

liquid to enter the housing.

1.  DO NOT expose the charger to rain or damp 

conditions. There is an increased risk of an electric 

shock if water penetrates the charger. 

2.  Use the voltages indicated in the technical 

specifications to recharge the R2 Rechargeable Speed 

Ratchet lithium-ion batteries. Failure to do this could 

create a risk of fire and explosion.

 

5.   Always unplug charger before cleaning or maintenance 

to reduce the risk of electric shock. DO NOT allow 

water to enter the housing. Cleaning cannot be 

Summary of Contents for 24493

















Reviews: