Oemtools 24454 Operating Instructions And Parts Manual Download Page 1

UNPACKING

After unpacking unit, inspect carefully for any damage 
that may have occurred during transit. Check for loose, 
missing, or damaged parts. If any damage is observed, a 
shipping damage claim must be filed with carrier.  
Do not use the OEMTOOLS Portable Power Source if 
broken, bent, cracked or damaged parts (including labels) 
are noted. Any Portable Power Source that appears  
damaged in any way, operates abnormally or  
is missing parts should be removed from  
service immediately. If you suspect that  
the Portable Power Source was subjected  
to shock load (a load that was dropped  
suddenly, unexpectedly, etc.) immediately  
discontinue use until it has been  
checked by a factory authorized  
service center.    

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect 
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions 
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.

The following safety information is provided as a guideline to help you operate your Portable Power Source under the 
safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe 
handling instructions are not known or not followed. The following safety instructions are to provide the user with the 
information necessary for safe use and operation. Please read and retain these instructions for the continued safe use 
of your service system. Failure to follow instructions listed below may result in serious injury. In addition, make certain 
that anyone that uses the equipment understands and follows these safety instructions as well.

Operating Instructions and Parts Manual 

24454

3/16

2016 ©OEMTOOLS

FOR CUSTOMER SERVICE

Technical Question?

 

CALL 1-866-458-2472

[email protected]

PPS-MARINE PERSONAL POWER 

SOURCE WITH JUMPER CABLES

Explanation of Safety Signal Words

CAUTION

Notes

CAUTION

WARNING

WARNING

:  Indicates a potentially hazardous situation which, if not avoided, could result in death or 

serious injury.

:  Indicates a potentially hazardous situation which, if not avoided, may result in minor or 

moderate injury.

:  Used without the safety alert symbol indicates a potentially hazardous situation which, if 

not avoided, may result in property damage. 

: Provide clarity and helpful information.

WARNING

  Pursuant to California Proposition 65, this product contains chemicals known to the state of 

California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

Summary of Contents for 24454








Reviews: