OEM DRAUGHT CAP NEUTRAL 30, Instructions For Use And Warnings

Page: 47 / 66

CAPPA NEUTRA/MOTORIZZ. serie 30/35/40
CHAPTER 5 –
TRANSPORT AND INSTALLATION
Page 47
5.4.5 Neutral cap assembly (model 35/40)
On the following pages we show the indications for the assembly of the cap.
Required DPI
Lifting mean
Forklift / Crane / Hoist
Tools to use
-
To assemble the cap, follow these steps:
S
TEP
ACTION
1
Place the cap on top of the oven, paying attention to the correct alignment of the cap and oven, and
the coupling of the fume outlet pipe from the oven (pos.1) to the cap.
2
Secure the cap on the oven by screwing 4 rear screws (pos.2), and the screws placed on the side
(pos.3)
3
Connect a 120mm tube to the fume outlet (pos.4) and connect it to the flue.
1
2
4
3