OEM DOMITOR PRO 430, Instructions For Use And Warnings

Page: 13 / 99

PIZZA OVEN mod. DOMITOR PRO
CHAPTER 2 – PRELIMINARY INFORMATION
Page 13
2
PRELIMINARY INFORMATION
2.1 Recipients
The manual is intended for operators in charge of using and managing the machine in all its stages of technical life.
It contains themes that refer to the correct use of the machine, in order to maintain the functional and qualitative
characteristics of the machine over time.
All information and warnings are for a proper use in complete safety.
The manual, like the CE Declaration of Conformity, is an integral part of the machine and must always accompany it
in every move or resale.
It is the user's job to keep this documentation intact, to allow it to be consulted, throughout the life of the machine.
2.2 Supply and Storage
The manual is provided in paper and electronic format. All additional documentation will be provided in the annex
to this manual. This manual can be downloaded in pdf format by linking to the site:
www.oemali.com .
Keep this manual in conjunction with the machine, so that it can be easily consulted by the operator.
The manual is an integral part of the safety, so:
1. must be kept intact (in all its parts). If it is lost or ruined, you should immediately request a copy.
2. must follow the machine until demolition (even in the case of movements, sale, rental, rent, etc....);
3. The attached manuals are part of this documentation and apply to them the same
recommendations/prescription as this manual.
The Manufacturer declines all responsibility for the wrong use of the machine and/or for damages caused as a result
of operations not covered in the technical documentation.
2.3 Updates
If the machine needs functional modifications or replacements, the Manufacturer is responsible for reviewing or
updating the manual. The Manufacturer is responsible for delivering the manual update.
The user is also responsible for ensuring that, if this document is modified by the Manufacturer, the updated versions
of the manual are actually present at the points of use.
2.4 Language
The original manual was written in Italian.
Any translations in additional languages must be done from the original instructions.
The Constructor is responsible for the information contained in the original instructions; translations in different
languages cannot be fully verified, so if an inconsistency is detected you must follow the text in the original language
or contact our Technical Documentation Office.