background image

1

Please read and save these instructions. Read through this owner’s manual carefully before using product. 
Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with 
instructions could result in personal injury and/or damage to product or property. Please retain instructions for 
future reference.

3-1/2 GALLON (13L) PARTS WASHER

Unpacking

After unpacking unit, inspect carefully for any damage 
that may have occurred during transit. Check for loose, 
missing, or damaged parts. Shipping damage claim 
must be filed with carrier.

Specifications and Dimensions

Maximum Capacity  Working Capacity 

Assembled Dims (Inches)(CM) 

Weight

Model 

Gallons 

Gallons 

Length Width Height 

(Lbs) (Kgs)

24800 

3.5 (13L) 

3 (11L) 

18” x 13 1/2”x 9” (45.7 x 34.3 x 22.9cm) 

  14    6.4

Operating Instructions and Parts Manual 

24800

SAFETY RULES

1.  Know your tool. Read this manual carefully. Learn

the tool’s applications and limitations, as well as, 
potential hazards specific to it.

2.  Ground all tools. If the tool is equipped with

three-pin plug, it should be plugged into a three-
pin electrical socket. Never remove the ground pin. 
Failure to properly ground unit could result in severe 
electrical shock and / or death.

3.  Do not abuse cord. Never use the cord to carry

tools or pull the plug from an outlet. Keep cord  
away from heat, sharp edges or moving parts.  
Replace damaged cords immediately. Damaged 
cords increase the risk of electric shock.

4.  Keep work area clean and well lit. Cluttered or dark

work areas invite accidents.

5.  Keep children away. All children should be kept

away from the work area. Never let a child handle
a tool without strict adult supervision.

6.  Do not operate this tool if under the influence of

alcohol or drugs. Read warning labels on prescrip-
tions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do
not attempt to operate.

7.  Use safety equipment. Eye protection should be

worn at all times when operating this tool. Use ANSI
approved safety glasses. Everyday eyeglasses are
NOT safety glasses. Dust mask, non-skid safety
shoes, hard hat, or hearing protection should be
used in appropriate conditions.

3/13

2013 ©OEM-TOOLS

Reviews: