UNPACKING
After unpacking the unit, inspect carefully for any damage
that may have occurred during transit. Check for loose,
missing, or damaged parts. If any damage is observed, a
shipping damage claim must be filed with the carrier. DO
NOT use the OEMTOOLS
™
Rechargeable Slim Inspection
Light if broken, bent, cracked or damaged parts (including
labels) are noted. Any Inspection Light that appears
damaged in any way, operates abnormally or is missing
parts should be removed from service immediately. If you
suspect that the Inspection Light was subjected to shock
load (a load that was dropped suddenly, unexpectedly,
etc.), immediately discontinue use until it has been
checked by a factory authorized service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
The following safety information is provided as a guideline to help you operate your OEMTOOLS
™
Rechargeable Slim
Inspection Light under the safest possible conditions. Any tool or piece of equipment can be potentially dangerous to
use when safety or safe handling instructions are not known or not followed. The following safety instructions are to
provide the user with the information necessary for safe use and operation. Please read and retain these instructions
for the continued safe use of your OEMTOOLS
™
Rechargeable Slim Inspection Light. Failure to follow instructions listed
below may result in serious injury. In addition, make sure that anyone who uses the equipment understands and follows
these safety instructions as well.
Operating Instructions and Parts Manual
24646
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
Thank you very much for choosing an OEMTOOLS
™
Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product
before you begin using it. This product is designed for certain applications only. OEMTOOLS
™
cannot be responsible for issues
arising from modification. We strongly recommend this product is not modified and/or used for any application other than that for
which it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first
contacted customer service to determine if it can or should be performed on the product.
WARNING
:
This product can expose you to chemicals, including DEHP, which are known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Explanation of Safety Signal Words
WARNING
:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION
:
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
NOTES
:
Provide clarity and helpful information.
RECHARGEABLE SLIM
INSPECTION LIGHT
1
5/19
2019 OEMTOOLS
™
WARNING
10m
BEAM DISTANCE
2.5h
MAX RUNTIME
700
LUMENS
MAX OUTPUT
