USER GUIDE
Thank you for choosing Odyssey Lighting. These lighting effect
features have preinstalled lamps and are ready to be used.
IMPORTANT!
Please read this User Guide before attempting to operate unit.
IMPORTANT
DUTY CYCLE
This device must be operated
on a duty cycle.
Failure to comply may result in
extreme damage to unit and
may void warranty.
IMPORTANT
NEVER TOUCH
any Halogen Lamp with bare
fingers. Oil from your fingers will
shorten lamp life. Never move
fixture until lamp has enough
time to cool. Lamps are not
covered under warranty.
Beam Spread:
Lenses:
Beams:
Bulb:
Lamp:
Color:
Sound Active:
Fuse:
Power:
Remote Switch:
Duty Cycle:
Warranty:
Width:
Height:
Depth:
Package Weight:
Medium
1 per unit
Multi
1 per unit
12V 100W (FCR)
Multi
Yes
3 Amp
120V
Green LED "on"=
sound active,
LED "off"= black out
Continuous
90 Days
10.5"
7.5"
10"
18 lbs.
For service contact your local authorized ODYSSEY dealer or call 626.334.0800
WARNING
CAUTION:
UNPLUG UNIT
To avoid electrical shock unplug
unit before servicing!
For Lamp Replacement:
Only use exact same voltage &
lamp type
LE-313
Specifications
1. If the effect does not turn on
a) try plugging into an outlet you know is working.
b) check fuse & make sure it is not blown
OPERATING INSTRUCTIONS
This unit is ready to be used. Multi-colored beams will chase amongst each other to audio (bass) sounds in music via the internal
microphone. Make sure the effect is installed and operated in a well ventilated area with fan vents clear of obstacles. For the
ultimate effect, fog or haze must be used in order to see the colorful beams. Although the unit is fan cooled the duty cycle
must be applied.
CAUTION
The lens area will get hot during normal operation of unit. After operation allow sufficient time to cool down before handling
or moving the unit.
IMPORTANT!
Never open the unit when in use. Always disconnect the power cord from the power source when replacing lamps or servicing
the unit. Always replace fuse and /or lamp with the exact same type.
LAMP REPLACEMENT
Remove Lamp cover from the main body of the unit. Gently remove the old lamp, Then, using a clean cloth or glove, carefully
insert the new lamp into the ceramic socket. NEVER TOUCH A NEW LAMP WITH YOUR BARE HANDS or FINGERS (oil and dirt
on your skin will damage the bulb).
TROUBLESHOOTING
STAR BLAZER System 1- Master Fixture, 3-Slave Fixture,
3-XLR Data cable & 1-Remote Switch
page 1
www.ODYSSEYGEAR.com
STAR BLAZER
