background image

FIG. 4

Next, attach three Nylon Pulleys 4 1/2 Rd (#64-Labeled L,W,M) 

to the pulley brackets on the Base Frame (#2) and secure them into place 
using three Hex Head Cap Screws 3/8-16 X 1 3/4 (#93), six Flat Washers 
SAE 3/8” (#71) and three Nylon Insert Jam Lock Nuts 3/8-16 (#82).

FIG. 3

On a flat surface, lay the 

Base Frame (#2)

 down and insert two 

Plastic End Caps 2” Sq. (#66) into the tube-ends of the 

Base Frame (#2)

,

as labeled above.  Next, attach two Nylon Pulleys 4 1/2 Rd (#64-Labeled
U, S) to the

  Base Frame (#2)

 and secure them into place using two Hex 

Head Cap Screws 3/8-16 X 2 (#99), four Flat Washers SAE 3/8” (#71) 
and two Nylon Insert Jam Lock Nuts 3/8-16 (#82).

Note:

The black boxed letters pointing to the pulleys are used

throughout this manual as reference to the Cable Mapping

Diagram on pages 21-24.

These black boxed letters will be

primarily used for locating certain pulleys during the cable routing 
process beginning with 

Fig. 31

.

FIG. 5

Next, locate the 

Low Row Stabilizer (#14) 

and insert it into the 

receptacle on the 

Base Frame (#2)

. Secure it into place using one Hex 

Head Cap Screw 3/8-16 X 3 (#90), two Flat Washers SAE 3/8” (#71) and 
one Nylon Insert Jam Nut 3/8-16 (#82).  Next,  insert two Plastic Insert 
Caps 1” Rd. (#98) into the tube-ends of the 

Low Row Stabilizer (#14)

, as 

labeled above.

Loosely Fasten

: Do not completely fasten this hardware

assembly at this time, as it will be completely fastened later in 

Fig.

10

 on the next page.

FIG. 6

Next, attach the 

Low Row Foot Support (#15)

  to the

  Low 

Row Stabilizer (#14)

 and secure it into place using one 

Foot Roll  Tube

1X16 (#31)

. Using the supplied Hex Key 3/16 (#108), secure the 

Foot

Roll Tube 1X16 (#31)

 into place using one Set Screw  3/8-16 X 1/2 (#47),

as shown in caption above. Be sure the 

Foot Roll Tube 1X16 (#31)

 is 

flush on each end after inserted into the

Low Row Foot Support (#15)

.

Next, insert two Plastic Insert Caps 1” Rd. (#98) into the tube-ends of the 

Foot Roll Tube 1X16 (#31)

.

LOOSELY FASTEN

3

ODY-5  Odyssey Home Gym

Summary of Contents for ODY-5





































Reviews: