FIG. 51
Continue to route the
Tension Cable (#40)
up and over the
Nylon Pulley 4 1/2 Rd. (#64-Labeled X) located on the assembled
Adjust-
able Double Pulley Plates (#27)
, as shown above.
Note
: Refer to the Cable Mapping Diagram on page 24 for further
detailed illustration of the
Tension Cable (#40)
routing.
FIG. 52
Continue to route the
Tension Cable (#40)
to the bracket
located on the
Base Frame (#2)
. Secure the end of the
Tension Cable
(#40)
using one Strap Bracket #20 (#102), one Shoulder Bolt 3/8 X 3/4
(#101) and one Nylon Insert Lock Nut 5/16-18 (#83). Refer to
Fig. A
on
page 24 for further clarification of this assembly.
FIG. 53
Next, insert one Plastic Insert Cap 1 X 2 (#68) into the tube-
end of the
Adjustable Seat Frame (#13)
.
Next, locate the
Seat Pad
(#35)
and attach it to the
Adjustable Seat Frame (#13)
, as shown above,
using two Hex Head Cap Screws 3/8-16 X 1 3/4 (#93) and two Flat
Washers SAE 3/8” (#71).
FIG. 54
Insert the assembled
Adjustable Seat Frame (#13)
into the
Leg Extension Bench Frame (#11)
, in the position as shown above. Be
sure to release the push-pull pin 1/2” (#54) as you begin to insert the
assembled
Adjustable Seat Frame (#13)
into the
Leg Extension Bench
Frame (#11)
.
15
ODY-5 Odyssey Home Gym
Summary of Contents for ODY-5
Page 24: ...CABLE MAPPING DIAGRAM FOR Pec Dec Cable 39 FIG A 23 ODY 5 Odyssey Home Gym ...
Page 25: ...CABLE MAPPING DIAGRAM FOR Tension Cable 40 FIG B FIG A ODY 5 Odyssey Home Gym 24 ...
Page 28: ...FIG 67 FIG 68 FIG 69 FIG 70 FIG 71 27 ODY 5 Odyssey Home Gym ...
