Odyssey BLAZIN’ MOTO Instruction Manual Download Page 1

Page: 1 / 4

LiPo Battery

On/Off
Switch

Battery Connector

INSTRUCTION MANUAL: BLAZIN’ MOTO

SETTING UP BLAZIN’ MOTO

1. Turn off the power switch.

2. Turn the battery cover knob to open compartment.

3. Connect the battery wire to the Blazin’ Moto’s connector as shown on the diagram.

4. Close the battery compartment and switch the power switch to On.

FOR

AGES

Summary of Contents for BLAZIN’ MOTO

Page 1: ...ZIN MOTO 8 SETTING UP BLAZIN MOTO 1 Turn off the power switch 2 Turn the battery cover knob to open compartment 3 Connect the battery wire to the Blazin Moto s connector as shown on the diagram 4 Clos...

Page 2: ...ffective voice commands make sure you are within 12 inches of the controller command speaker If left unattended the car will go into power saving mode after 5 minutes To wake press any button on the c...

Page 3: ...s the Demo Button Truck Robot Movement Drift Dance Mode Transforming from Truck to Robot Press the forward button or speak FORWARD into the voice command speaker and the truck robot will move forward...

Page 4: ...n installing the batteries carefully follow the polarity marking Do not mix different battery types Remove exhausted or drained batteries Do not exceed charging volts and amps of 5v1a Do not leave cha...