14
Installing Memory Card
-
Insert the memory card in the card reader in the correct
orientation as shown (
). Make sure the micro SD card is
aligned correctly, the contacts must point down towards the
screen. Card and card reader can be damaged if the card is not
inserted correctly. Carefully slide the card into the tray until it
clicks into place.
To remove the card, press the card a little into the card slot and
it is unlocked. If the card is inserted correctly, look around 2mm
out of the card compartment.
-
To view the files on the card, access the Explorer by touching
the Explorer icon and selecting the "SD card" directory.
Please note:
-
If you insert the card and the latching mechanism is already
locked, you can use the card but it will be unlocked when
re-pressing, the map looks halfway out of the card compartment
- that is wrong. Press the card in again so that it snaps into
place and protrudes only about 2mm from the card slot.
-
We recommend using only Micro SD or SDHC cards up to
64GB capacity.
-
When a Micro SD card is inserted in or ejected from the device,
it may take few seconds for the
device to update the content.
-
Please avoid inserting or ejecting Micro SD card when other
operation is running as this may cause
the system hang. Do NOT remove the card if the content
inside the card is being played.
-
Please use your fingernails to properly insert or remove the
card.
