Figure 3.2 Add device
2.
Double-click "ODOT-S2E2" or right-click "ODOT-S4E2", Select “common
device attributes”, Set the gateway working mode to Transparent in the popup page.
Double-click "COM1" or "COM2" or right-click "COM1" or "COM2" and click "Serial
Port Properties". The "Serial Port Settings" window will pop up. After setting the
communication parameters, click the "OK" button to save and return.
The meaning of each parameter is as follows
：
Operating mode
：
It is used to set up gateway as master station or slave station in the network.
Default is master mode.