OCULUS ImageCam 3, Instruction Manual

Page: 69 / 76

17 Terms of Guarantee and Servicing
Instruction Manual ImageCam® 3 (G/69200/XXXX/EN 0120 Rev01) 63 / 68
17.2 Assumption of Liability for Functions and Damage
OCULUS will only accept responsibility for the safety, reliability and
serviceability of the ImageCam® 3 if the unit is used in compliance with
the following terms:
 Only use the equipment in conformance with this instruction
manual.
 There are no user-serviceable parts either on or inside the
ImageCam® 3. OCULUS shall not assume any liability if assembly,
extensions, adjustments, changes or repairs are carried out by
unauthorized personnel, if the ImageCam® 3 is maintained
improperly or if it is handled incorrectly.
 If the above-referenced work is performed by authorized persons,
request a certification of the scope and type of repair, and, if
necessary, the changes to the standard values or to the operating
range from the service technician. This certification must contain
the date of performance and statement of the performing firm, with
signature.
 If requested, OCULUS will provide the service technician with a list
of spare parts and additional descriptive material for this purpose.
 Make certain that only original OCULUS parts are used.