OCULUS ImageCam 3, Instruction Manual

Page: 67 / 76

15 Transport and Storage
Instruction Manual ImageCam® 3 (G/69200/XXXX/EN 0120 Rev01) 61 / 68
15 Transport and Storage
The ImageCam® 3, must be properly dismantled and packed before being
transported or stored.
15.1 Transport and Storage Information
Storage conditions
Transport conditions

Wait approx. 3-4 hours after transport before putting the
ImageCam® 3 into initial operation. Extreme temperature changes
from cold areas to warm rooms can cause condensation on the
optical components.
15.2 Dismantling and Packing

End the current session.
Attention
Risk of equipment damage due to incorrect shipment

Avoid shocks, vibrations, and contamination.

Transport the ImageCam® 3 carefully. Avoid shocks and vibration.
Attention
Risk of equipment damage from improper storage

Avoid contamination, high temperatures and humidity.

Avoid shocks, vibrations, and contamination. Store the
ImageCam® 3 in accordance with the specified storage conditions.

Avoid placing near heaters and moisture.
Ambient temperature -10 — +55°C
Relative humidity, including condensation 20% — 80 %
Air pressure range 700 hPa — 1060 hPA
Ambient temperature range -10 — +55°C
Relative humidity, including condensation 20% — 80 %
Air pressure range 700 hPa — 1060 hPA