OCULUS ImageCam 3, Instruction Manual

Page: 62 / 76

12 Patient Data Management
56 / 68 Instruction Manual ImageCam® 3 (G/69200/XXXX/EN 0120 Rev01)
12.5.5 “Interface” Tab
Use this tab to enter the folder for different interface types and to
activate or deactivate them.
The interface “Default.pat” (3) is used if the Patient Data Management
user interface is launched by a third-party programme.

Place the interface “Default.pat” into the third-party programme’s
folder.

Select “in” folder as the third-party programme’s folder.
1 Settings for HL7 3 Settings for Default.pat
2 Settings for GDT
Fig. 12-11: “Interface” tab
1
2
3