7/5/2019
Getting Started with your Oculus Go | Oculus Support Centre
https://support.oculus.com/183135912238400/
7/16
2. Tap Settings from the bottom menu.
3. Tap the headset you currently have paired.
4. Tap Controller, then tap the controller you currently have paired.
5. Tap Unpair Controller.
Once your controller has been paired, you can use your controller
to interact with apps and games. Using the buttons on your
controller, you can do the following:
Trigger: Press to select things
Touchpad: Press to select things or swipe to browse
Back button: Press to go back to the previous screen or menu
Oculus button: Press to go back to Oculus Home or press and hold to
reset your controller orientation
Press any button to wake the controller after you've turned on your
headset
To remove the battery from your Oculus Go controller:
1. Remove the battery cover of your controller by lightly pulling
at the bottom half of the controller until it comes loose.
2. Lightly pull on the battery from the bottom end of the
controller until it comes loose and can be removed.
If you're looking for information on prescription lens inserts for your
Oculus Go, visit
Before you wear your Oculus Go with glasses, check to make sure that
the width and height of your frames match the following
measurements:
Was this answer helpful?
Yes No