OCULUS Corvis ST, Instruction Manual, Page: 48 / 86

12 Perform a Mea s urement
42 / 80 Instruction Manual Corvis® ST (G/72100/XXXX/EN 1019 Rev01)
12.7.4 Backup data

Press the [Backup] button on the upper right part in the Patient Data
Management user interface. The following dialog appears:

Select whether all of the data or only changed data should be backed
up.
☞
The Patient Data Management function internally tags all saved data
records.
If you selecting the option "Changed and new data only", only the data
records that were not saved during a previous backup will be backed up.

Press the [...] button to the right of the "Backup directory" box (3).

In the dialog that appears, select the folder to which the data should
be backed up.

Confirm your selection with [OK].

To back up the data, press the [Save] button (4). The previously
selected data will then be backed up to the corresponding folder.
12.7.5 Recon s truct data
If a loss of data occurs, the data from a previous backup can be re-
imported into the Patient Data Management user interface.

Press the [...] button to the right of the "Backup directory" box (3).

In the dialog that appears, select the folder which contains the
backup data.
1 [Restore] button 4 [Save] button
2 Display free storage space. 5 Backup data selection
3 Backup folder and button [...]
Abb. 12-10: "Backup" dialog
1
2
4
5
3