manualshive.com logo in svg

OCULUS 68100, Instruction Manual

Share
Download
OCULUS 68100 Instruction Manual Download Page 75

18  Cleaning, Di

s

infection and Maintenance

Instruction Manual Myopia Master® (G/68100/EN Rev04 0820)

69 / 92

Protective glass covers for the optics

The openings in the housing for the optics are covered by protective glass 
covers which must be kept dust- and dirt-free. 

If they are dirty, clean the lens protection glass with a lint-free cloth 
moistened with alcohol.

Cleaning the Housing

Clean the housing once a month or if necessary.

Turn the Myopia Master® off, 

sec. 9.2, page 20

.

If it is dirty, it is best to clean the housing plastic surfaces with a soft 
cloth and an anti-static cleaning agent.

Make sure that no liquid gets into any of the openings of the 
Myopia Master®.

Wipe off any residue from painted surfaces with the mixture for 
painted surfaces.

Cleaning the Touch Screen

Clean the touch screen using a dry, lint-free cloth.

18.2 Di

s

infection

Caution

Risk of electric shock if the Myopia Master® is not completely
disconnected from the mains for the disinfection.

Turn the Myopia Master® off, 

sec. 9.2, page 20

.

Pull the power plug before disinfecting. When disconnecting 
electrical connections, pull on the respective plug and not on the 
cable itself.

Required material:

Mikrozid sensitive wipes premium
Fa. Schülke & Mayr
Softpack 48 pieces
Art.Nr. 165711
Schülke & Mayr GmbH
Telefon: +4940521000
Telefax: +494052100318
[email protected]
www.schuelke.com

Summary of Contents for 68100



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands