Octopus T-MOOV, Manual

Page: 20 / 28

20
USER MANUAL
Maintenance
Maintenance should be carried out within 12 months after the robot first enters service.
For the robot’s annual maintenance, call your customer service center at +33 (0)2 90 38 01 83 .
The robot’s maintenance must be conducted only by a OCTOPUS BIOSAFETY technician or an approved distributor.
During maintenance, the robot's parts, notably its safety features, are checked to see if they are in good working order.
The robot may only be maintained, disassembled, or repaired by a technician approved by OCTOPUS BIOSAFETY.
If anyone else attempts to do so, OCTOPUS BIOSAFETY shall be released from all liability, and the warranty may be
canceled in full.
How to disinfect the robot before returning it to the maintenance center
- Remove the shell (4 screws with a 30 mm Torx bit).
- Remove the wheels (4 nuts with a 19 mm socket wrench).
- The wheels and shell can be washed with water.
- Clean and disinfect the robot with a cloth or sponge using your regular sanitary procedure for equipment coming
in or out.
- Put the robot back into the transport crate provided to you at the time of purchase.
The technical cover may only be removed by a technician authorized by OCTOPUS
BIOSAFETY.
The body of the robot should be cleaned with a cloth or sponge and water.
Do not use a high-pressure jet directly on the robot.
30 mm torx tip - 4 screws
19 mm socket wrench - 4 nuts
Technical cover:
Do not remove!