Octopus F IP-Netpackage Operating Instructions Manual Download

Page: 90 / 103

Step by Step

Individual phone configuration

Adjusting the ring tone

Press one of the keys shown in idle mode

Page 17.

Select and confirm the option shown.

To adjust the ring tone: Keep pressing the keys until the desired tone

is set.

Save.

Adjusting the speakerphone to the room acoustics

To help the other party understand you clearly while you are talking

into the microphone, you can adjust the telephone to the acoustics in

your environment: "Quiet room", "Normal room" and "Noisy room".

Press one of the keys shown in idle mode

Page 17.

Select and confirm the option shown.

To set the room type: Keep pressing these keys until the setting you

want appears on the screen.

Save.

Activating/deactivating the ringer

)

Hold down the key shown.

Language for system functions

Press the key shown.
Select and confirm the option shown.

Select and confirm the option shown.

Select the language you wish to use (such as "Spanish") and press

the "OK" dialog key to confirm.

Ring tone?

Speakerphone mode?

More features?

*48= Select language?

15=Spanish?

Summary of Contents for F IP-Netpackage








































































































Search results

Summary of Contents for F IP-Netpackage

Reviews:

Related manuals for F IP-Netpackage

Brands by name

Popular brands

Octopus F IP-Netpackage, Operating Instructions Manual

Search results

Summary of Contents for F IP-Netpackage

Reviews:

Related manuals for F IP-Netpackage

Brands by name

Popular brands