Octopus F IP-Netpackage Operating Instructions Manual Download

Page: 66 / 103

Step by Step

More functions/services

Displaying and deleting messages you have sent

Prerequisite: The recipient has not yet accepted a sent message.

Open the idle menu

Page 17.

Select and confirm the option shown.

Confirm.
The text message is displayed.
Select and confirm the option shown.
The message is deleted.

Viewing and editing incoming messages

Pay attention to the notes on

Page 18.

The LED lights up. Press the key shown.

Confirm.
The sender’s caller ID appears on the display.
Confirm.
The text message appears on the display.

Viewing the transmission time

Confirm.

Calling the sender

Select and confirm the option shown.

Deleting messages

Select and confirm the option shown.

View sent message?

Message sent?

Delete?

View messages?

Message sent?

Time/date sent?

Call sender?

Delete?

Summary of Contents for F IP-Netpackage








































































































Search results

Summary of Contents for F IP-Netpackage

Reviews:

Related manuals for F IP-Netpackage

Brands by name

Popular brands

Octopus F IP-Netpackage, Operating Instructions Manual

Search results

Summary of Contents for F IP-Netpackage

Reviews:

Related manuals for F IP-Netpackage

Brands by name

Popular brands