10
OSD3358-SM-RED
– User Guide
Rev. 1.0 9/19/2017
Octavo Systems LLC
Copyright 2017
2
OSD3358-SM-RED Use Cases
The OSD3358-SM-RED Platform can be used in 3 different modes. A description of each mode
and instructions on how to set up each mode is described below.
2.1
Standalone boot up
The board can be used as a standalone platform for software development. To boot it up as a
standalone system, the following components will be needed.
1. 5V AC adapter
2. HDMI/DVI-D monitor
3. Micro HDMI to HDMI cable and/or HDMI to DVI-D adapter
4. Wired/wireless USB keyboard and mouse
5. Ethernet cable or WiFi USB adapter connected to a network for internet access
The following steps describe the procedure to setup the board as a standalone software
development tool.
1. Connect the micro HDMI connector of the HDMI cable to X6 connector on board.
2. Connect the HDMI connector of the HDMI cable into the monitor. HDMI to DVI-D
convertor may be necessary if the monitor only has a DVI-D input.
Figure 7: Connecting OSD3358-SM-RED to a monitor via HDMI cable
